Products
EcoLine 'facade system'
Ecolabel
Environmental Policy
Many actions have been implemented in recent years, at regional, national and, above all, European Community levels, which aim at promoting respect for the environment
Terrazzo
Technical characteristics
In compliance with EN 13748-1
| Requirement values | |
| Thickness tolerance |
Calibrated Tiles ± 1.0 mm |
| Breaking strength | No individual result of the failure stress shal be less than 4.00 Mpa |
| Water absorption to the whole tile |
Not greater than 8% |
| Dimensional deviations |
± 0.3 % |
| Breaking load |
Not less than 2.5 kN where the tile has surface area <= 1100 cm² |
| Resistance to deep abrasion |
No individual test result exceeds 25 mm |
The water absorption to the face of tile is lower compared to the traditional terrazzo. In order to improve it further, in the year 2011 Veniston has presented to the market an innovative water base impregnator treatment, available on request.
Full body terazzo tiles produced in several finishing: honed, sandblasted, brushed, polished.
STARTING FROM SEPTEMBER 2012 WE CAN PROVIDE A NEW SURFACE THAT MEETS THE RATE OF R10.
The material and technical information, are representative only and are subject to change or updating without notice. Veniston shall not be liable for any incomplete or incorrect information or omissions.